In addition, the scaffold and its components must support, without failure, its own weight and at least four times its maximum intended load. Since it is an elevated platform, the stability decreases as the height increases. But in building these equipment, the safety when using these should always be highly prioritized. These are only a few basic physical structures of scaffold towers. Frames and panels should also be locked together to prevent uplift. Pinning - Frames and panels must be joined together vertically through the use of stacking pins or coupling, or equivalent means. Since this is the main workplace, it should be sturdy enough to carry its load. They should be installed along all open sides and at both ends of platforms, except when used as a walkway, the platform is the main working area of the scaffold.

Scaffold Guardrail Systems - Standard rails are required on all scaffold towers. All brace connections must be secured to prevent dislodging. Because the frames are stacked, the cross braces have to keep the scaffold plumb, level, and square. Bracing Connect panels and frames with diagonal, horizontal, or cross braces along or as a combination, in order to laterally secure the vertical members. A specific access, such as a mounted ladder, must be used. The Scaffold cross braces should never be used as a means of access. Supported scaffold poles, frames and uprights must be plumb and braced to prevent any displacement caused by swaying. Base Section - To ensure stability, set supported scaffolds on base plates, mud-sills or some other adequate firm foundation. Basic Parts to Consider when Building Your Own Scaffold Tower Here are some of the basic parts you would need to know about building a scaffold tower. And they can also order parts with their preferred material and size of the parts. ( A person can buy it in bulk or individual pieces according to their preference. And also, there are lots of sites that sell scaffolding spare parts. In addition, there is a lot of information regarding building your own scaffold towers on the Internet. They can also choose if they want it mobile or stationary. They can decide on which material to use and also the desired dimensions. Some people would like their own customized scaffold towers. Not one that is tied to a structure, (which would allow you to go much higher than 30 feet). This would be in reference to stand alone scaffold towers.

Reaching 5 foot high all the way up to 30 feet tall. The standard dimensions are 5 foot and 7 foot long. Scaffold tower can be erected in all shapes and sizes. Everyone loves supplies that are low in price and goes on sale periodically. It is strong, dependable, and is relatively low in cost. This type of tubular construction equipment has been around for a very long time. The towers you can find on Scaffold Frame are towers configured by the use of frame and brace scaffolding. For carriage charges to other areas, please contact us before ordering.Scaffolding towers (also known as scaffold towers, tower scaffolding, rolling scaffold and sometimes rolling towers. Price is inclusive of delivery (usually within seven days) for mainland England and Wales. Please note, towers with platform heights of 8.70m and above are only suitable for internal use. The many safety features include a dual brake on/off system large, articulated rubber feet on all stabilisers quick release pull rings with stainless steel pins on all bracings and a wide integral ladder with hexagonal rungs for easier climb and additional safety. The tower comes in a choice of two platform widths (0.85m & 1.45m) and two platform lengths (1.8m & 2.5m). The HiLyte 500 scaffold tower is manufactured to HD1004 from 50.8mm dia extruded tube with a wall thickness of 1.6mm making it suitable for industrial and trade use.